Maintenance knowledge | Common faults and maintenance of tube ice machine

Tube ice makerThe production is a hollow cylindrical ice cube, through the evaporator refrigerant directly and water heat exchange, so that the water gradually solidified to form tubular ice, commonly known as tube ice. The outer diameter of the tube ice is φ22mm, φ28mm, φ35mm, etc., the length is between 25 and 45mm, and the inner hole is φ5 to 10mm. The cylindrical hollow tubular ice has high transparency, convenient storage and transportation.Tube ice makerIt is suitable for long time storage and long-distance transportation, such as food processing, fishing, chemical industry, medicine and other fields.

Tube ice makerIn the process of use, common faults mainly include failure to start, water leakage problems, slow ice making speed and other problems.

1, can not start:Tube ice makerFailure to start is a common problem in operation, which not only affects production efficiency, but may also indicate a potential electrical failure in the equipment. Troubleshooting this type of failure requires a systematic approach and certain electrical knowledge:

‌Power supply problem ‌ :Check whether the power socket is powered on and the plug is firmly connected; Make sureIce machineThe power switch is on; Use a voltmeter to check whether the power supply voltage meets the equipment requirements; Whether the fuse is blown or the circuit breaker is tripped.

‌Control circuit fault ‌ :Check the circuit board for short circuit or damage; Verify that the emergency stop button is pressed; Whether the start button and control relay work properly ‌.

‌Compressor problem ‌ :Check whether the thermal overload protection of the compressor is activated; The phase sequence of the power supply is correct.

‌Sensors and controllers ‌ :Check whether the water level sensor and temperature controller of the water tank work properly.